Mag

Mag

Page: 1 of 57067

Next

Articles

More and more non-military manufacturers are incorporating MOLLE technology into outdoor equipment.MOLLE is used not only to describe the specific system manufactured by Speciality Defense Systems, but is used interchangeably to generically describe all load bearing systems and subsystems that utilize the woven PALS (Pouch Attachment Ladder System) webbing for modular pouch attachment (though MOLLE is proprietary to Natick Labs, most use MOLLE and PALs interchangeably). There are three general modes of attachment in the MOLLE arena, they are "Natick Snap", that uses a polyethlyene reinforced webbing strap with the 'pushthedot' snap for security. mag MOLLE is used to define the current generation of load-bearing equipment and rucksacks utilized by the United States Army. This method of attachment has become a de facto standard for modular tactical gear, replacing the click and stick system used in the earliest modular vest systems (which is still in use with most Western police departments). Most of these criticisms have centered on the sustainment-load pack & frame, due to the external plastic frame being too fragile and subject to breaking in the field (since mitigated), that the zippers have a tendency to burst when stuffed full, and that the pack's straps lack sufficient length to easily accommodate body armor. mag 5" intervals.

The MOLLE system was introduced in 1997. The PALS grid consists of horizontal rows of 1" webbing, spaced 1" apart, and reattached to the backing at 1. mag Derivatives based upon the MOLLE attachment method (such as the Tactical Tailor MALICE clip system) have also been developed. However it did not see widespread issue until after the September 11, 2001 attacks and was used by US troops serving in Afghanistan and, later, Iraq. There is the polymer "Malice" clip developed by Tactical Tailor as an alternative to the Natick Snap concept, which interweaves like the Natick Snap but terminates in a semi-permanent closure that requires a screwdriver/flat tipped object to disengage. mag The United States Marine Corps wanted a larger load-bearing capability, a smaller overall volume, the ability to carry 60 mm and 81 mm mortar rounds external to the pack, and a simpler overall layout and organization of the system's parts. Subsequent redesign of the SDS MOLLE led to the deletion of this "feature" and thus the vest (FLC) and ruck/frame were separate non-integral items.

Early criticisms of the MOLLE system emerged, particularly from the Army. mag Any system which utilizes modular attachment methods and is usable with US general issue MOLLE components is often considered "MOLLE-compatible" or is called a "MOLLE" system.. Further, the first generation of this system utilized a "ball & socket" interface between the frame and rucksack belt (which in itself formed the waistbelt of the MOLLE vest). mag The system's modularity is derived from the use of PALS webbing, rows of heavy-duty nylon stitched onto the vest as to allow for attachment of various MOLLE-compatible pouches and accessories. This interface method led to numerous lower back injuries due to the ball (mounted on the frame) missing the socket interface on the waistbelt and impacting the user's body. Finally there are a variety of attachments that fall into the "Weave & Tuck" category in which the end of an interwoven strap is tucked into an item's backing after attachment to a vest or pack (Paraclete's SofStrap and Spec Ops Brand's hybrid attachment).

mag It is produced for the United States Government under contract by several contractors, such as Specialty Defense, Armor Holdings as well as Eagle Industries. As of 2004, the Marine Corps has adopted a new off-the-shelf pack design by Arc'teryx and has begun introducing.

Search

Menu

• Home
• Iwb Holster
• Concealment Holsters
• Molle Pack
• Molle Holster Pouch
• Tactical Holsters
• Molle Gear
• Concealed Carry Holster
• Molle Backpack
• Molle Bag

Related Images

Concealment Holster | Molle Tactical Gear | Molle Holster